Load data for .30-30 Ackley Improved + .308 | 123gr | Prvi Partizan FMJ

Recommended Powder(s): Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 123gr \| Prvi Partizan FMJ
Manufacturer SKU:	B-460
Bullet Weight:	123gr \| 8.0g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30-30 Ackley Improved load data
Case Length (l3):	2.030" \| 51.6mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	48.6 Grains of Water \| 3.16 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B9135_C326
Last updated:	2026-02-11

Load data for 76 loads in caliber .30-30 Ackley Improved with .308 | 123gr | Prvi Partizan FMJ bullet and 38 powders such as Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	86%	40770	88%	**69	100%
ADI AR 2219	<<locked>>	90%	41220	89%	**08	96%
Accurate 2015	<<locked>>	96%	41147	89%	**82	98%
[Accurate 2460]*	<<locked>>	94%	41176	89%	**75	93%
Accurate 2495	<<locked>>	96%	32619	70%	**07	96%
[Accurate 2520]*	<<locked>>	97%	36622	79%	**43	93%
Alliant AR-Comp 👍	<<locked>>	96%	36854	79%	**72	99%
Alliant Reloder-10x 👍	<<locked>>	93%	41698	90%	**12	99%
Alliant Reloder-7	<<locked>>	85%	41089	89%	**39	99%
Baschieri & Pellagri 106	<<locked>>	89%	41524	89%	**07	97%
[Hodgdon Benchmark]*	<<locked>>	95%	41234	89%	**30	93%
[Hodgdon CFE BLK]*	<<locked>>	85%	40770	88%	**74	91%
Hodgdon H322	<<locked>>	96%	41220	89%	**08	96%
Hodgdon H335	<<locked>>	91%	41742	90%	**15	95%
Hodgdon H4198	<<locked>>	86%	41002	88%	**00	96%
[IMR 3031]*	<<locked>>	96%	31705	68%	**57	94%
IMR 4198 👍	<<locked>>	91%	41510	89%	**66	99%
[Lovex D073.4]*	<<locked>>	92%	41423	89%	**66	93%
[Lovex D073.5]*	<<locked>>	94%	41176	89%	**75	93%
Norma 200 👍	<<locked>>	89%	40886	88%	**85	99%
[Norma 202]*	<<locked>>	97%	36274	78%	**16	94%
ReloadSwiss RS 14	<<locked>>	96%	28950	62%	**67	100%
[ReloadSwiss RS 40]*	<<locked>>	93%	41017	88%	**75	94%
Rottweil R 901	<<locked>>	97%	40103	86%	**59	95%
SNPE Vectan BA6 1/2	<<locked>>	83%	40683	88%	**46	100%
SNPE Vectan SP 10	<<locked>>	90%	40799	88%	**92	95%
SNPE Vectan Tubal 3000	<<locked>>	97%	40248	87%	**93	95%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	32155	69%	**39	93%
[Somchem S321]*	<<locked>>	96%	41742	90%	**05	92%
Somchem S335	<<locked>>	96%	37782	81%	**80	95%
Vihtavuori N120	<<locked>>	89%	41756	90%	**43	100%
Vihtavuori N130	<<locked>>	94%	41046	88%	**43	99%
Vihtavuori N133	<<locked>>	96%	35752	77%	**41	96%
[Vihtavuori N135]*	<<locked>>	96%	26542	57%	**80	92%
[Vihtavuori N140]*	<<locked>>	96%	33750	73%	**28	93%
[Vihtavuori N530]*	<<locked>>	96%	41640	90%	**95	92%
[Vihtavuori N540]*	<<locked>>	97%	33837	73%	**51	92%
[Winchester 748]*	<<locked>>	96%	41162	89%	**08	93%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	34345	74%	**51	100%
[ADI AR 2219]*	<<locked>>	81%	30574	66%	**72	92%
[Accurate 2015]*	<<locked>>	81%	25556	55%	**38	93%
[Accurate 2460]*	<<locked>>	89%	33881	73%	**34	90%
[Accurate 2495]*	<<locked>>	85%	22118	48%	**31	90%
[Accurate 2520]*	<<locked>>	92%	31169	67%	**18	90%
[Alliant AR-Comp]*	<<locked>>	81%	22843	49%	**92	93%
Alliant Reloder-10x	<<locked>>	81%	28253	61%	**29	95%
Alliant Reloder-7	<<locked>>	81%	35853	77%	**41	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	31444	68%	**10	94%
[Hodgdon Benchmark]*	<<locked>>	90%	35244	76%	**08	90%
[Hodgdon CFE BLK]*	<<locked>>	82%	37695	81%	**11	90%
[Hodgdon H322]*	<<locked>>	83%	27601	59%	**90	90%
[Hodgdon H335]*	<<locked>>	81%	29718	64%	**49	90%
[Hodgdon H4198]*	<<locked>>	81%	34954	75%	**75	94%
[IMR 3031]*	<<locked>>	90%	26498	57%	**03	90%
IMR 4198	<<locked>>	81%	30763	66%	**39	97%
[Lovex D073.4]*	<<locked>>	87%	34113	73%	**25	90%
[Lovex D073.5]*	<<locked>>	89%	33881	73%	**34	90%
Norma 200	<<locked>>	81%	32097	69%	**08	98%
[Norma 202]*	<<locked>>	90%	29399	63%	**56	90%
ReloadSwiss RS 14	<<locked>>	93%	27978	60%	**44	100%
[ReloadSwiss RS 40]*	<<locked>>	87%	33156	71%	**15	90%
[Rottweil R 901]*	<<locked>>	87%	30095	65%	**36	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	38406	83%	**10	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	30618	66%	**75	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	87%	29573	64%	**74	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	27528	59%	**24	90%
[Somchem S321]*	<<locked>>	92%	36593	79%	**00	90%
[Somchem S335]*	<<locked>>	85%	26672	57%	**24	90%
Vihtavuori N120	<<locked>>	81%	32474	70%	**75	100%
[Vihtavuori N130]*	<<locked>>	81%	27369	59%	**47	94%
[Vihtavuori N133]*	<<locked>>	83%	24134	52%	**49	91%
[Vihtavuori N135]*	<<locked>>	94%	24540	53%	**21	90%
[Vihtavuori N140]*	<<locked>>	92%	29588	64%	**29	91%
[Vihtavuori N530]*	<<locked>>	93%	37362	80%	**13	90%
[Vihtavuori N540]*	<<locked>>	93%	29878	64%	**56	90%
[Winchester 748]*	<<locked>>	92%	35955	77%	**03	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data